Using the MODIFY and INSERT Operations (continued)
8-12
Entering Ladder Programs
The VERT (VERTical line) function key will remove the
vertical line to the left and below the cursor. The HORZ
(HORiZontal element) function key will delete the element
or line under the cursor. To delete a box, place the cursor at
the upper left corner and press the HORZ function key.
This function key will enter the created or changed rung
ENTER
F8
into memory if the rung is correct. If there is a mistake in
the rung, the system will not allow the rung to be entered.
Instead a message will be displayed to indicate that the
rung is incorrect. You must correct the error (or abort the
operation) before proceeding to another operation.
SIMATIC VPU200/560 Programming Manual