Table of Contents
Advertisement
SIMATIC VPU200/560 Programming Manual
The following list describes what each of the parameters controls:
1.
COLUMNS: This sets the width of the printed page. Note that if 72 is
chosen here, the PRINT RIGHT RAILS entry will automatically be set
to NO.
2.
BAUD RATE: This controls the rate of communication to the printer
and should be set the same as on the printer. (The VPU hardware is set
to 7 bit, odd parity, 1 stop bit, and is not user-selectable.)
3.
LINES PER PAGE: This sets the length of the printed page.
4.
DATE: This sets the date in the order of Month, Day, and Year which
will be shown on the printout.
5.
PRINT RIGHT RAILS: This parameter is used to specify whether
ladder logic diagrams will be printed with the right rail (which is the
long vertical line which joins the networks together). Note that if 72
was chosen for the number of columns, only NO will be allowed for this
entry.
Printing
7-5
Advertisement
Table of Contents
