Table of Contents
Advertisement
6.2
Available Function Keys
SIMATIC VPU200/560 Programming Manual
After the TITLE function key is pressed in the Offline Menu. the screen
displays the word "Title" at the top of the screen and the words "Date" and
"Version" at the bottom. The function keys available in the Offline Menu
will change to the following:
FUNCTION KEYS
Aside from the ABORT and ENTER function keys there are six function
keys for creating a title. The following explains these six function keys:
(DELete CHaracter.) This function key is used to delete the
DELCH
F3
character on which the cursor is placed and will move the
other characters over to fill the vacated space.
(INSert CHaracter.) This function key will allow a
INSCH
F4
character (or string of characters) to be inserted. The
characters will be inserted at the space just before the
cursor. When the key is first pressed, "INSERT ON" will
appear on the screen to indicate that characters may be
inserted. Characters will continue to be inserted until the
function key is pressed again, which will remove the
"INSERT ON" phrase from the screen.
(DELete LiNe.) This function key will delete the line on
DELLN
F5
which the cursor is placed. The location of the cursor on the
line is not important. The rest of the lines of text will move
up to fill the vacated line.
(INSert LiNe.) This function key will insert a line above the
INSLN
F6
line on which the cursor is placed. Note, however, that if the
maximum of 16 lines are already on the screen, you will be
unable to insert another line. To insert the line, a line
would first have to be deleted so that there was room on the
screen for the new line. The location of the cursor in the
line is not important. After the blank line is inserted, the
cursor will move to the first position of the new line.
Naming the Program Disk
6-3
Advertisement
Table of Contents
