Skoda OCTAVIA 2004 Workshop Manual page 91

OCTAVIA
Edition 03.98
S00.5111.52.20
Fuel Formation / Fuel Injection
- Unscrew the nut of the tensioning pulley.
- Take the toothed belt off the toothed belt
sprockets of the camshaft and injection
pump.
- Unplug the connector for the electrical con-
nections of the injection pump.
K - Unscrew the securing bolts -1- at the mount-
ing bracket.
Note:
On no account, slacken the central nut -2- of
the injection pump sprocket otherwise the ba-
sic setting of the injection pump will be altered
and can no longer be set with workshop tools.
K - Then, unscrew the securing bolts from the
rear support -arrow-.
- Take off the injection pump.
Installing
- Insert the injection pump into the mounting
bracket and first of all attach the bolt at the
rear support with the tapered nut.
- Insert the front securing bolts and tighten the
bolts to 25 Nm.
- Loosely secure the injection pump sprocket
at the hub with new securing bolts (do not
rotate injection pump sprocket).
23
------------ ------------