Skoda OCTAVIA 2004 Workshop Manual page 40

01
Reading measured value block
2500/rpm
4.6 mg/h
Reading measured value block
1650/rpm
4.1 mg/h
Reading measured value block
00000000 00000110
------------ 01-28 -------------
Self-Diagnosis
1
→
2.0 °CA 94.2 °C
1
→
2.0 °CA 93.2 °C
17
00000000
→
10000000
Work step 7: Switching off ignition
- Wait at least 5 seconds with ignition OFF.
Work step 8: Switching on ignition
- Wait at least 10 seconds with ignition ON.
Work step 9: 2nd test of fuel supply and
other systems
- Start engine.
- Select function “Reading measured value
block” and display group 001.
K - For 5 seconds increase the engine speed to
2500 rpm and then run engine at idling
speed.
Work step 10: 2nd test of exhaust gas recir-
culation
K - Increase engine speed to 1600 rpm up to
1700 rpm and maintain it for at least 10 sec-
onds in this range.
- Press C.
- Enter 017 for display group 017 and read
readiness code.
K Specified value in display field 2:
00000110
Specified value in display field 4:
000000000
- → Press.
- If the specified values are not reached, re-
peat procedure for generating readiness
code ⇒ page 01-26.
OCTAV1A
Edition 01.04
S00.5111.56.20