Skoda OCTAVIA 2004 Workshop Manual page 164

23
------------ 23-48.2 ------------
Fuel Formation/Fuel Injection
If the specification is achieved:
K - Test voltage supply of accelerator pedal po-
sition sender:
6-pin connector at
wiring loom, contact
If the specification is not achieved:
- Connect test box to the wiring loom to the
engine control unit ⇒ page 23-19.
Test box V.A.G 1598/22
K Test the wiring between test box and connector
of sender for open circuit according to the cur-
rent flow diagram:
6-pin connector at
wiring loom, contact
- Rectify any open circuit or short circuit in the
wiring.
2 + earth
2 + 3
1 + earth
1 + 6
Test box V.A.G 1598/22,
1
2
3
4
5
6
OCTAVIA
Specification
approx. 5 V
approx. 5 V
approx. 5 V
approx. 5 V
socket
8
11
23
24
12
25
Edition 12.00
S00.5111.54.20