Skoda OCTAVIA 2004 Workshop Manual page 171

OCTAVIA
Read measured value block
0 km/h 0 0 0
Read measured value block
0 km/h 1 0 0
Edition 12.00
S00.5111.54.20
Fuel Formation/Fuel Injection
6
K
→
000000 0
6
K
→
000000 0
K -
This signal is used to avoid overrevving and load
change jolts when the clutch is released, and is
required for the cruise control system.
t t and
♦ Vehicle system tester V.A.G 1552 with cable
V.A.G 1551/3, 3A, 3B or 3C
♦ Hand-held multimeter (e.g. V.A.G 1526 A)
♦ Adapter cable set (e.g. V.A.G 1594 A)
♦ Test box V.A.G 1598/22 or V.A.G 1598/31
condition
l Fuses o.k.
- Read measured value block, display group
006; engine switched off ⇒ page 01-35.
Specification in display block 2: 0 X X
- Depress clutch.
Specification: 1 X X
If the specification is not achieved:
- End output (function 06) and switch the igni-
tion off.
- Unplug the connector of the clutch pedal
switch ⇒ page 23-2, Overview of fitting lo-
cations.
Connect the multimeter for resistance meas-
urement between the contacts of the switch.
Specification:
Clutch not depressed: max. 10
Clutch depressed:
If the specification is not achieved:
- Replace clutch pedal switch (F36).
If the specification is achieved:
23
------------ ------------