Skoda OCTAVIA 2004 Workshop Manual page 83

OCTAVIA
♦ for feed line
♦ 28 Nm
♦ replace
Fuel
♦ 20 Nm
♦ for return-flow line
♦ 28 Nm
♦ to control valve/fuel filter
10 Injection
♦ tighten to 25 Nm
♦ use ring wrench, e.g. 3035, for remov-
ing injection lines
♦ always remove complete set of lines
11
♦ 45 Nm
12
Edition 12.00
S00.5111.54.20
Fuel Formation/Fuel Injection
13
♦ for cylinder 3 with needle lift sender
♦ removing and installing, testing
♦ tighten screw for return-flow line of
1
1
1
1
1
1
20
21
22
23
2
2
Note:
Fuel hoses at the engine must be secured only
with spring strap clips. It is not permitted to use
collar-type or screw-type clips.
1
♦ to fuel tank
2 Feed line
♦ from fuel tank
3
♦ do not mix up, blue ring at top
♦ fitting location: arrow points toward
♦ if filter replaced, remove retaining
♦ passage to filter opened at tempera-
♦ passage to filter closed at tempera-
⇒ page 23-16
cylinder 3 to 10 Nm
fuel tank
clamp and take off control valve with
fuel lines connected
ture below +15 °C
ture above +31 °C
23
------------ ------------