Skoda OCTAVIA 2004 Workshop Manual page 111

OCTAVIA
Read measured value block
15.4 °C
Edition 12.00
S00.5111.54.20
Fuel Formation/Fuel Injection
ture sender
♦ Vehicle system tester V.A.G 1552 with cable
♦ Hand-held multimeter (e.g. V.A.G 1526 A)
♦ Adapter cable set (e.g. V.A.G 1594 A)
♦ Test box V.A.G 1598/22 or V.A.G 1598/31
-
K -
7
→
°C 16.7 °C
Note:
If an open circuit exists in the wiring to the sender,
a substitute value of 136.8 °C is displayed.
-
If an implausible temperature, or a substitute
temperature of 136.8 °C is displayed:
K -
-
t testers and aids
V.A.G 1551/3, 3A, 3B or 3C
Read measured value block, display group
007; engine switched off and cooled down
⇒ page 01-51.
Observe readout in display block 3.
End output (function 06) and switch ignition
off.
Unplug connector -1- from the intake mani-
fold temperature sender -2-.
Connect multimeter for resistance measure-
ment to contacts 1 and 2 of the intake mani-
fold temperature sender -2-.
23
t
------------ ------------