OCTAV1A
X fault detected!
Reading measured value block
00000110
00000000
Edition 01.04
S00.5111.56.20
Self-Diagnosis
→
17
00000000
→
10000000
Work step 11: Interrogating fault memory
-
Enter function 02 Interrogating fault me-
mory and confirm entry with key Q.
K The number of stored faults or No fault de-
tected appears in the display.
If a fault is stored:
-
Rectify fault by referring to the fault table
⇒ page 01-8 and re-generate the readiness
code ⇒ page 01-26.
If no fault is stored:
-
→ Press.
K Readiness code was successfully generated, if
no fault is stored after two work sequences of
the test procedure in the fault memory for the
engine control unit and if the following display
appears in the channel 017.
01
------------ 01-28.1 -------------