Error Code Is Displayed On The Status Menu - Epson WF-C5890 Series User Manual

Solving Problems
Error Messages
Failed to receive faxes because the fax data
capacity is full. Touch the Job/Status at the
bottom of the Home Screen for details.
The combination of the IP address and the
subnet mask is invalid. See your documentation
for more details.
To use cloud services, update the root certificate
from the Epson Web Config utility.
Check that the printer driver is installed on the
computer and that the port settings for the
printer are correct.
Recovery Mode
Update Firmware
Related Information
"Messages are Displayed on the Control Panel when Scanning to a Network Folder" on page 86
&

Error Code is Displayed on the Status Menu

If a job does not complete successfully, check the error code displayed on the history of each job. You can check the
error code by pressing the
its solution.
Code Problem
001 The product was turned off by a power failure.
101 The memory is full.
>
A Message or Error Code is Displayed on the LCD Screen
Solutions
Received faxes may accumulate without being processed due to the
following reasons.
❏ Cannot print because a printer error has occurred.
❏ Cannot save in the computer or the memory device.
Contact your printer administrator.
Contact your printer administrator.
Make sure the printer port is selected correctly in Property > Port from
the Printer menu as follows.
Select "USBXXX" for a USB connection, or "EpsonNet Print Port" for a
network connection.
Contact your printer administrator.
button, and then selecting Job Status. See the following table to find the problem and
Clear the printer error. To check the details and solutions to the error,
press the button and then select Printer.
To check whether or not received faxes have been saved, press the
button and then select Job. To save received faxes, turn on the
computer or connect a memory device to the printer.
Solution
-
Try the methods below to reduce the size of the print
job.
❏ Lower the print quality and the resolution.
❏ Change the format setting.
❏ Reduce the number of images, letters or fonts
used in the print job.
327
>
Error Code is Displayed on the Sta
...