Epson WF-C5890 Series User Manual page 466

Administrator Information
7. Click OK.
The printer is updated.
Related Information
"Default Value of the Administrator Password" on page 19
&
Group Policy Setting Items
Items
Enable this Group Policy
Access Control
Configure a control method for traffic of IP packets.
Items
Permit Access
Refuse Access
IPsec
Local Address(Printer)
Select an IPv4 address or IPv6 address that matches your network environment. If an IP address is assigned
automatically, you can select Use auto-obtained IPv4 address.
Note:
If an IPv6 address is assigned automatically, the connection may be unavailable. Configure a static IPv6 address.
Remote Address(Host)
Enter a device's IP address to control access. The IP address must be 43 characters or less. If you do not enter an IP
address, all addresses are controlled.
Note:
If an IP address is assigned automatically (e.g. assigned by DHCP), the connection may be unavailable. Configure a static IP
address.
Method of Choosing Port
Select a method to specify ports.
❏ Service Name
If you select Service Name for Method of Choosing Port, select an option.
>
Network Security Settings
Settings and Explanation
You can enable or disable a group policy.
Settings and Explanation
Select this to permit configured IP packets to pass through.
Select this to refuse configured IP packets to pass through.
Select this to permit configured IPsec packets to pass through.
466
>
Encrypted Communication Using IPsec/IP Filtering