Restricting File Operations From Pdl; Changing The Administrator Password Using Web Config - Epson WF-C5890 Series User Manual

Administrator Information
4. Change the settings as necessary.
❏ Audit log setting
Select ON, and then click OK to enable this feature.
Note:
You can also set up from the printer's control panel.
Settings > General Settings > System Administration > Security Settings > Audit Log
❏ Exports the audit logs to the CSV file.
Click Export to export the log as a CSV file.
❏ Deletes all audit logs.
Click Delete to delete all log data.
Related Information
"Default Value of the Administrator Password" on page 19
&

Restricting File Operations from PDL

This feature protects files from unauthorized PDL operations.
1. Enter the printer's IP address into a browser to access Web Config.
Enter the printer's IP address from a computer that is connected to the same network as the printer.
You can check the IP address of the printer from the following menu.
Settings > General Settings > Network Settings > Network Status > Wired LAN/Wi-Fi Status
2. Enter the administrator password to log in as an administrator.
3. Select in the following order.
Product Security tab > File Operations from PDL
4. Sets whether or not allow File Operations from PDL.
5. Click OK.
Related Information
"Default Value of the Administrator Password" on page 19
&

Changing the Administrator Password Using Web Config

You can set the administrator password using Web Config.
Changing the password prevents unauthorized reading or modification of the information stored on the device,
such as ID, password, network settings, contacts, etc. It also reduces a wide range of security risks, such as
information leaks in network environments and security policies.
1. Enter the printer's IP address into a browser to access Web Config.
Enter the printer's IP address from a computer that is connected to the same network as the printer.
>
Product Security Settings
445
>
Changing the Administrator Password Using Web
...