Epson WF-C5890 Series User Manual page 448

Administrator Information
3. Select in the following order.
Network Security tab > Protocol
4. Configure each item.
5. Click Next.
6. Click OK.
The settings are applied to the printer.
Related Information
"Default Value of the Administrator Password" on page 19
&
"Protocols you can Enable or Disable" on page 448
&
"Protocol Setting Items" on page 449
&
Protocols you can Enable or Disable
Protocol
Bonjour Settings
iBeacon Settings
SLP Settings
WSD Settings
LLTD Settings
LLMNR Settings
LPR Settings
RAW(Port9100) Settings
RAW(Custom Port) Settings
IPP Settings
FTP Settings
SNMPv1/v2c Settings
>
Network Security Settings
Description
You can specify whether to use Bonjour. Bonjour is used to search for devices, print, and so
on.
You can enable or disable the iBeacon transmission function. When enabled, you can search
for the printer from iBeacon-enabled devices.
You can enable or disable the SLP function. SLP is used for push scanning and network
searching in EpsonNet Config.
You can enable or disable the WSD function. When this is enabled, you can add WSD devices,
and print from the WSD port.
You can enable or disable the LLTD function. When this is enabled, it is displayed on the
Windows network map.
You can enable or disable the LLMNR function. When this is enabled, you can use name
resolution without NetBIOS even if you cannot use DNS.
You can specify whether or not to allow LPR printing. When this is enabled, you can print from
the LPR port.
You can specify whether or not to allow printing from the RAW port (Port 9100). When this is
enabled, you can print from the RAW port (Port 9100).
You can specify whether or not to allow printing from the RAW port (custom port). When this
is enabled, you can print from the RAW port (custom port).
You can enable or disable the IPP function. When enabled, you will be able to print over the
Internet. It is also displayed when searching for devices on the network.
You can specify whether or not to allow FTP printing. When this is enabled, you can print over
an FTP server.
You can specify whether or not to enable SNMPv1/v2c. This is used to set up devices,
monitoring, and so on.
>
Controlling Using Protocols
448