Epson WF-C5890 Series User Manual page 89

Preparing the Printer and Making Initial Settings
Registering Destinations to Contacts
You can register up to 200 destinations to the contacts list in total.
Registering a Destination to Contacts from Web Config
1. Enter the printer's IP address into a browser to access Web Config.
Enter the printer's IP address from a computer that is connected to the same network as the printer.
You can check the IP address of the printer from the following menu.
Settings > General Settings > Network Settings > Network Status > Wired LAN/Wi-Fi Status
2. Enter the administrator password to log in as an administrator.
3. Select in the following order.
Scan/Copy or Fax tab > Contacts
4. Select the number that you want to register, and then click Edit.
5. Enter Name and Index Word.
6. Select the destination type as the Type option.
Note:
You cannot change the Type option after registration is complete. If you want to change the type, delete the destination
and then register again.
7. Enter a value for each item, and then click Apply.
Related Information
"Scanning Originals to a Network Folder" on page 210
&
"Scanning Originals to an Email" on page 212
&
"Default Value of the Administrator Password" on page 19
&
>
Preparing and Setting Up the Printer Accordin
89
...