Epson WF-C5890 Series User Manual page 102

Preparing the Printer and Making Initial Settings
Items
User name Display Attribute
Fax Number Attribute
Email Address Attribute
Arbitrary Attribute 1 - Arbitrary
Attribute 4
Checking the LDAP Server Connection
Performs the connection test to the LDAP server by using the parameter set on LDAP Server > Search Settings.
1. Enter the printer's IP address into a browser to access Web Config.
Enter the printer's IP address from a computer that is connected to the same network as the printer.
You can check the IP address of the printer from the following menu.
Settings > General Settings > Network Settings > Network Status > Wired LAN/Wi-Fi Status
2. Enter the administrator password to log in as an administrator.
3. Select in the following order.
Network tab > LDAP Server > Connection Test
4. Select Start.
The connection test is started. After the test, the check report is displayed.
Related Information
"Default Value of the Administrator Password" on page 19
&
LDAP Server Connection Test References
Messages
Connection test was successful.
Settings and Explanation
Specify the attribute name to display as the user name. Enter between 0 and 255
characters in Unicode (UTF-8). The first character should be a-z or A-Z.
Example: cn, sn
Specify the attribute name to display when searching for fax numbers. Enter a
combination of between 1 and 255 characters using A-Z, a-z, 0-9, and -. The first
character should be a-z or A-Z.
Example: facsimileTelephoneNumber
Specify the attribute name to display when searching for email addresses. Enter a
combination of between 1 and 255 characters using A-Z, a-z, 0-9, and -. The first
character should be a-z or A-Z.
Example: mail
You can specify other arbitrary attributes to search for. Enter between 0 and 255
characters in Unicode (UTF-8). The first character should be a-z or A-Z. If you do
not want to search for arbitrary attributes, leave this blank.
Example: o, ou
This message appears when the connection with the server is successful.
102
>
Preparing and Setting Up the Printer Accordin
Explanation
...