Sending Faxes Using The Printer - Epson WF-C5890 Series User Manual

Faxing
>

Sending Faxes Using the Printer

Sending Faxes Using the Printer

You can send faxes by entering fax numbers for recipients on the control panel.
Note:
❏ When sending a fax in monochrome, you can preview the scanned image on the LCD screen before sending.
❏ You can reserve up to 50 monochrome fax jobs even while the phone line is in use for a voice call, sending another fax, or
receiving a fax. You can check or cancel reserved fax jobs from
1. Place the originals.
"Placing Originals" on page 147
You can send up to 200 pages in one transmission; however depending on the remaining amount of memory,
you may not be able to send faxes even with less than 200 pages.
2. Select Fax on the home screen.
3. Specify the recipient.
"Selecting Recipients" on page 228
4. Select the Fax Settings tab, and then make settings such as Resolution and Direct Send.
"Fax Settings" on page 241
5. Tap (Presets) on the fax top screen to save the current settings and the recipients in Presets. This allows
you to easily load the settings at any time.
Recipients may not be saved depending on how you specified the recipients, such as entering a fax number
manually.
x
6. Tap to send the fax .
Note:
❏ If the fax number is busy or there is some problem, the printer automatically redials after one minute.
❏ To cancel sending, tap
❏ It takes longer to send a fax in color because the printer performs scanning and sending simultaneously. While the
printer is sending a fax in color, you cannot use the other features.
Related Information
"Checking Fax Jobs in Progress" on page 253
&
y
.
.
227