Error Code On The Status Menu - Epson WF-6590 User Manual

Hide thumbs Also See for WF-6590:
Table of Contents

Advertisement

User's Guide
Error Messages
Failed to receive faxes because the fax data
capacity is full. Press [i] for details.
Combination of the IP address and the subnet
mask is invalid. See your documentation.
Recovery Mode
Related Information
"Contacting Epson Support" on page 217
&
"Installing the Optional Units" on page 208
&
"Replacing Maintenance Rollers in Paper Cassette 1" on page 123
&
"Replacing Maintenance Rollers in Paper Cassette 2 to 3" on page 127
&
"Installing Applications" on page 150
&
"Updating Applications and Firmware" on page 154
&

Error Code on the Status Menu

If a job does not complete successfully, check the error code displayed on the history of each job. You can check the
error code by pressing the button, and then selecting Job History. See the following table to find the problem and
its solution.
Code
Problem
001
The product was turned off by a power failure.
101
The memory is full.
Solving Problems
Solutions
Received faxes may accumulate without being processed due to the
following reasons.
❏ Cannot print because a printer error has occurred.
Clear the printer error. To check the details and solutions to the error,
press the button and then select Printer Information.
❏ Cannot save in the computer or the memory device.
To check whether or not received faxes have been saved, press the
button and then select Job Monitor > Communication Job. To save
received faxes, turn on the computer or connect a memory device to
the printer.
See the Network Guide.
The printer has started in recovery mode because the firmware update
failed. Follow the steps below to try to update the firmware again.
1. Connect the computer and the printer with a USB cable. (During
recovery mode, you cannot update the firmware over a network
connection.)
2. Visit your local Epson website for further instructions.
Solution
-
Try the methods below to reduce the size of the print
job.
❏ Lower the print quality and the resolution.
❏ Change the format setting.
❏ Reduce the number of images, letters or fonts
used in the print job.
156

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents