Encrypted Communication Using Ipsec/Ip Filtering - Epson WF-C5890 Series User Manual

Administrator Information

Encrypted Communication Using IPsec/IP Filtering

About IPsec/IP Filtering
You can filter traffic based on IP addresses, services, and port by using IPsec/IP Filtering function. By combining of
the filtering, you can configure the printer to accept or block specified clients and specified data. Additionally, you
can improve security level by using an IPsec.
Note:
Computers that run Windows Vista or later or Windows Server 2008 or later support IPsec.
Configuring Default Policy
To filter traffic, configure the default policy. The default policy applies to every user or group connecting to the
printer. For more fine-grained control over users and groups of users, configure group policies.
1. Enter the printer's IP address into a browser to access Web Config.
Enter the printer's IP address from a computer that is connected to the same network as the printer.
You can check the IP address of the printer from the following menu.
Settings > General Settings > Network Settings > Network Status > Wired LAN/Wi-Fi Status
2. Enter the administrator password to log in as an administrator.
3. Select in the following order.
Network Security tab > IPsec/IP Filtering > Basic
4. Enter a value for each item.
5. Click Next.
A confirmation message is displayed.
6. Click OK.
The printer is updated.
Default Policy Setting Items
Default Policy
Items
IPsec/IP Filtering
>
Network Security Settings
Settings and Explanation
You can enable or disable an IPsec/IP Filtering feature.
461
>
Encrypted Communication Using IPsec/IP Filtering