Restricting Usb Connections And Use Of External Memory - Epson WF-C5890 Series User Manual
Hide thumbs
Also See for WF-C5890 Series:
- Start here (4 pages) ,
- User manual (438 pages) ,
- Start here (4 pages)
Table of Contents
Advertisement
Administrator Information
Restricting USB Connections and Use of External Memory
You can disable the interface that is used to connect the device to the printer. Make the restriction settings to
restrict printing and scanning other than via network.
Note:
You can also make the restriction settings on the printer's control panel.
❏ Memory Device : Settings > General Settings > Printer Settings > Memory Device Interface > Memory Device
❏ PC Connection via USB : Settings > General Settings > Printer Settings > PC Connection via USB
1. Enter the printer's IP address into a browser to access Web Config.
Enter the printer's IP address from a computer that is connected to the same network as the printer.
You can check the IP address of the printer from the following menu.
Settings > General Settings > Network Settings > Network Status > Wired LAN/Wi-Fi Status
2. Enter the administrator password to log in as an administrator.
3. Select in the following order.
Product Security tab > External Interface
4. Select Disable on the functions you want to set.
Select Enable when you want to cancel controlling.
❏ Memory Device
Prohibit saving the data to external memory via USB port for external device connection.
❏ PC connection via USB
You can restrict the usage of the USB connection from the computer. If you want to restrict it, select
Disable.
5. Click OK.
6. Check that the disabled port cannot be used.
❏ Memory Device
Confirm that there is no response when connecting a storage device such as USB memory to the external
interface USB port.
❏ PC connection via USB
If the driver was installed on the computer
Connect the printer to the computer using a USB cable, and then confirm that the printer does not print
and scan.
If the driver was not installed on the computer
Windows:
Open the device manager and keep it, connect the printer to the computer using a USB cable, and then
confirm that the device manager's display contents stays unchanged.
Mac OS:
Connect the printer to the computer using a USB cable, and then confirm that the printer is not listed if you
want to add the printer from Printers & Scanners.
>
Product Security Settings
443
>
Restricting USB Connections and Use of External M
...
Advertisement
Table of Contents
Troubleshooting
