Epson WF-C5310 Start Here

WF-C5310/WF-C5390/WF-C5810/WF-C5890
Start Here
IMPORTANT: Before using this product, make sure you read
these instructions and the safety instructions in the online User's
Guide.
This printer is designed for use with Epson
Note:
third-party ink. For important ink information, visit
http://latin.epson.com/tintaepson or see your printer box.
Important Safety Instructions:
should always follow basic safety precautions to reduce the risk of fire,
electric shock, and personal injury, including the following:
• Do not use the Epson product near water.
• Always keep this guide handy.
• Avoid using a telephone during an electrical storm. There may be a
remote risk of electric shock from lightning.
• Do not use a telephone to report a gas leak in the vicinity of the leak.
To reduce the risk of fire, use only a No. 26 AWG or larger
Caution:
telecommunication line cord.
The illustrations show the WF-C5890, but the steps are the same
for all models, unless otherwise specified.
Not all products are available in all regions.
Note:
1
Unpack
WF-C5310/WF-C5390
The product is heavy and should be lifted and moved by two
Warning:
people.
If you purchased an optional paper cassette, see the online
Note:
User's Guide for installation instructions.
1
Remove all protective materials from the product.
Keep the two protective pieces shown after removing
Note:
them from inside the product. You will need them if you transport
your product. See the online User's Guide for transportation
instructions.
ink packs only, not
®
When using telephone equipment, you
WF-C5810/WF-C5890
2
Lift up the printer cover (WF-C5310/WF-C5390) or scanner
unit (WF-C5810/WF-C5890) and remove all protective
materials from inside the product, then close the printer
cover or scanner unit.
WF-C5310/WF-C5390
3
Insert the output tray, then set it down gently.
2
Turn on and configure
1
Connect the power cord to the back of the product and to
an electrical outlet.
WF-C5310/WF-C5390
Do not connect to your computer yet.
Caution:
2
Raise the control panel and turn on the product.
If an error code appears, turn off the product and check that
Note:
no protective material has been left inside the product.
3
WF-C5310/WF-C5390: Select your language, date, and
time using the arrow buttons and OK button.
WF-C5810/WF-C5890: Select your language, country, date,
and time on the LCD screen.
You can change these settings later using the product's
Note:
control panel. For more information, see the online User's Guide.
WF-C5810/WF-C5890
WF-C5810/WF-C5890