Function Manifold Components - Gs-1530, Gs-1532, Gs-1930 And Gs-1932 - Terex Genie GS-1530 Service Manual

Section 4 • Repair Procedures
Manifolds
6-1
Function Manifold Components -
GS-1530, GS-1532, GS-1930 and GS-1932
The function manifold is mounted under the machine, between the module trays.
Index
No. Description
— Coil nut (items E, F and H) .......................................................................................................... 5 ft-lbs / 7 Nm
1 Diagnostic nipple ....................................... A ......................... Testing
2 Check disc ................................................. B ......................... Steer circuit ............................ 18 ft-lbs / 24 Nm
3 Relief valve,
1800 to 3500 psi / 124 to 241 bar ............. C ......................... Lift relief .................................. 20 ft-lbs / 27 Nm
4 Check valve, 10 psi / 0.7 bar ..................... D ......................... Drive circuit ............................. 20 ft-lbs / 27 Nm
5 Solenoid valve, 3 position 4 way ............... E ......................... Drive forward/reverse ............. 25 ft-lbs / 34 Nm
6 Solenoid valve, 3 position 4 way ............... F ......................... Steer left/right ......................... 25 ft-lbs / 34 Nm
7 Flow regulator and relief valve,
0.75 gpm / 2.8 L/min,
1500 psi / 103 bar ...................................... G ......................... Steer circuit ............................ 26 ft-lbs / 35 Nm
8 Solenoid valve, 2 position 4 way ............... H ......................... Platform up ............................. 25 ft-lbs / 34 Nm
9 Relief valve,
3500 psi / 241 bar maximum ..................... I .......................... System relief ........................... 20 ft-lbs / 27 Nm
How to Install a Valve Cartridge
1 Dip the cartridge in clean oil to lube the O-rings.
2 Screw the cartridge in by hand until the top
O-ring is met, then torque to specification.
3 If required, install the valve coil(s) onto the
valve stem. Install the coil nut onto the valve
stem and torque to specification.
4 - 66
Schematic
Item Function
GS-30 • GS-32 • GS-46
October 2008
REV C
Torque
Part No. 96316