Manifold Component Specifications - Terex Genie GS-1530 Service Manual

Section 2 • Specifications
SPECIFICATIONS
Manifold Component
Specifications
Plug torque
SAE No. 2
SAE No. 4
SAE No. 6
SAE No. 8
SAE No. 10
SAE No. 12
2 - 4
Valve Coil Resistance
Note: The following coil resistance specifications are at
an ambient temperature of 68°F / 20°C. As valve coil
resistance is sensitive to changes in air temperature,
the coil resistance will typically increase or decrease by
50 in-lbs / 6 Nm
4% for each 18°F / -7.7°C that your air temperature
increases or decreases from 68°F / 20°C.
13 ft-lbs / 18 Nm
Description
18 ft-lbs / 24 Nm
Solenoid valve, 3 position 4 way
50 ft-lbs / 68 Nm
20V DC with diode (schematic item E and AC)
55 ft-lbs / 75 Nm
Solenoid valve, 3 position 4 way
20V DC with diode (schematic item F)
75 ft-lbs / 102 Nm
Solenoid valve, 2 position 4 way
20V DC with diode (schematic item H)
Solenoid valve, 2 position 2 way N.C.
20V DC with diode (schematic item N)
Solenoid valve, 2 position 4 way
20V DC with diode (schematic item AE and AI)
Solenoid valve, 3 position 5 way
20V DC with diode (schematic item AG)
Continuous improvement of our products is a
Genie policy. Product specifications are
subject to change without notice.
GS-30 • GS-32 • GS-46
June 2009
REV E
Specification
27.2Ω
19Ω
19Ω
25Ω
19Ω
19Ω
Part No. 96316