Replace The Hydraulic Tank Breather Cap - Models With Optional Hydraulic Oil - Terex Genie GS-1530 Service Manual

Section 3 • Scheduled Maintenance Procedures April 2006
CHECKLIST C PROCEDURES REV C
C-2
Replace the
Hydraulic Tank Breather Cap -
Models with Optional Hydraulic Oil
Genie requires that this procedure be performed
every 500 hours or semi-annually, whichever
comes first.
The hydraulic tank is a vented-type tank. The
breather cap has an internal air filter that can
become clogged or, over time, can deteriorate. If
the breather cap is faulty or improperly installed,
impurities can enter the hydraulic system which
may cause component damage. Extremely dirty
conditions may require that the cap be inspected
more often.
1 Remove and discard the hydraulic tank breather
cap.
2 Install and new cap onto the tank.
3 - 28 GS-30 • GS-32 • GS-46 Part No. 96316