Terex Genie GS-1530 Service Manual page 145

September 2005
Observe and Obey:
Troubleshooting and repair procedures shall be
completed by a person trained and qualified on
the repair of this machine.
Immediately tag and remove from service a
damaged or malfunctioning machine.
Repair any machine damage or malfunction
before operating the machine.
Before Troubleshooting:
Read, understand and obey the safety rules
and operating instructions in the appropriate
operator's manual on your machine.
Be sure that all necessary tools and test
equipment are available and ready for use.
Part No. 96316
About This Section
There are two groups of schematics in this
section. An illustration legend precedes each
group of drawings.
Electrical Schematics
Hydraulic Schematics
General Repair Process
Malfunction
discovered
Return to
service
GS-30 • GS-32 • GS-46
Section 6 • Schematics
Schematics
Electrocution/burn hazard.
Contact with electrically charged
circuits could result in death or
serious injury. Remove all rings,
watches and other jewelry.
Bodily injury hazard. Spraying
hydraulic oil can penetrate and
burn skin. Loosen hydraulic
connections very slowly to allow
the oil pressure to dissipate
gradually. Do not allow oil to squirt
or spray.
Identify
symptoms
problem
still exists
Inspect
and test
problem
solved
Troubleshoot
Perform
repair
6 - 1