Section 4 • Repair Procedures
MANIFOLDS
6-3
Check Valve Manifold Components -
GS-1530, GS-1532, GS-1930 and GS-1932
The check valve manifold is mounted on the function manifold.
Index
No.
Description
1
Check valve, 200 psi / 13.8 bar ................. S ......................... Drive circuit ............................. 20 ft-lbs / 27 Nm
S
How to Install a Valve Cartridge
1 Dip the cartridge in clean oil to lube the O-rings.
2 Screw the cartridge in by hand until the top
O-ring is met, then torque to specification.
3 If required, install the valve coil(s) onto the
valve stem. Install the coil nut onto the valve
stem and torque to specification.
4 - 70
Schematic
Item
1
Note: 'alpha' callouts refer
to corresponding notes on
the hydraulic schematic
GS-30 • GS-32 • GS-46
(after serial number GS3004-66986)
Function
October 2008
REV C
Torque
Part No. 96316