Physical And Electrical Characteristics; Table 8: Docsis Module Physical Dimensions; Table 9: Docsis Module Operational Characteristics; Table 10: Docsis Module Leds - Juniper G10 CMTS Hardware Manual

Juniper networks, inc. g10 cmts hardware guide
Hide thumbs Also See for G10 CMTS:
Table of Contents

Advertisement

DOCSIS Module

Physical and Electrical Characteristics

Table 8: DOCSIS Module Physical Dimensions

Table 9: DOCSIS Module Operational Characteristics

Table 10: DOCSIS Module LEDs

36
JUNOSg 3.0 G10 CMTS Hardware Guide
This section describes the physical and electrical characteristics of the DOCSIS Module. See
Table 8 through Table 10.
The DOCSIS Module installs into the chassis from the front and spans two midplane
connector columns. The module includes the RF upconverter and modem subassemblies.
The module connects to the midplane through connectors J1 through J5. See "Card Cage and
Midplane" on page 21 for related information.
The front panel connectors are not used.
Each DOCSIS Module with its subassemblies consumes 120 watts maximum power.
Dimension
Value
Height
233 mm (9.2 in.) card
262 mm (10.3 in., 6 U) front panel
Width
40 mm (1.6 in.)
(front panel width)
Depth
340 mm (13.4 in.)
(excluding front panel and cPCI connectors)
Characteristic
Downstream
Frequency Range
91 through 857 MHz
Power level
+50 through +61 dBmV
(adjustable)
Modulation
64QAM and 256QAM
Transmission protocol
DOCSIS MPEG
Symbol rate
5.057 Mbaud (64QAM)
5.361 Mbaud (256QAM)
Data rate (Max.)
40 Mbps/interface
Interfaces
4
LED Label
Color
CPCI
Green
Test
Green / Red
Upstream
5 – 42 MHz
+8 to +55 dBmV (16QAM)
+8 to +58 dBmV (QPSK)
QPSK, 16QAM
Frequency-agile TDMA
160, 320, 640, 1280, and 2560
(user configurable)
10 Mbps/interface
8 or 16 (depending on the DOCSIS Module model)
Function
On—cPCI bus is active.
Off—No activity on bus.
Green Blinking—Self-test running.
Green On—Self-test passed.
Red On—Self-test failed.
Off—Self-test not running.

Advertisement

Table of Contents
loading

Table of Contents