User Setting Items Which Are Not Include In The Setting Menu - Epson EPL-N2700 Service Manual

EPSON EPL-N2700 / N2750
1.4.2.2 User Setting Items which are not include in the
Setting Menu
The items shown below are not included in the setting menu but can be
set by users. The values set by the users are not cleared by the
initialization through the control panel.
Setting Item Setting value
32-byte character
PrinterName
string
32-byte character
Device ID MFG
string
32-byte character
Device ID MDL
string
32-byte character
Device ID DES
string
32-byte character
Device ID CID
string
Mail Bin 1 - 10 NAME 24-byte data
MP Tray -0.4 mm to 4.00 mm
compensation (in 0.5 mm steps)
LC1 - LC3 -0.4 mm to 4.00 mm
compensation (in 0.5 mm steps)
-0.4 mm to 4.00 mm
Duplex compensation
(in 0.5 mm steps)
Product Description
Default Value Setting method
EPL-N2700 / EJL, Printer Name
EPL-N2750 Command
(Undefined) EJL
(Undefined) EJL
(Undefined) EJL
(Undefined) EJL
(Undefined) EJL
0.0 mm EJL
0.0 mm EJL
0.0 mm EJL
Panel Operation
1.4.2.3 Setting Item Description
This section provides the information on the product-specific setting
item.
MP Tray Size
"Auto" is added and the North American version automatically detects
LT, HLT, LGL, EXE, GLG, GLT, and B paper sizes, while the versions
for areas other than North America detect the A3, A4, A5, IB5, LTR,
LGL, and F4 paper sizes. When "Auto" is selected, the following
conditions should be considered:
If the edge guide is set to any position other than automatic
o
selectable paper sizes, the paper size loaded is detected A3.
The automatically selected paper size is shown in Status Sheet and
o
EJL status.
MP Type
Selects the paper type for the MP Tray.
If "Paper Source" is set to "Auto", the printer automatically selects the
paper source that matches the selected paper type from the paper
sources that currently store the selected paper size.
The MP Type selected during paper source selection is only specified
with the EJL command.
In printer modes that have no specification command, operations are
the same as when "Plain" is set for "MP Type".
The EPL-N2700 / EPL-N2750 has the setting item "Paper Type", if the
"Paper Type" is set to "Normal" and "MP Tray" is set to "Transprnc" or
Letterhead", the MP Type is also set to the engine side.
Revision B
46