Explanation Of The Printout; Explanation Of Individual Menu Items; Main Functions; S Macro Select - Epson PP 408 User Manual

Table of Contents

Advertisement

3.3
Explanation of the printout on the previous page
The heading PRINT OUT gives information about the VERSION of the printer's
firmware.
The next two headings are followed by two columns of standard settings:
S INTERFACE - for communication between the computer operating system
and the printer it is necessary to have the same communication settings or
features. The standard settings are:
S Buffer
8 Kbyte
S Word Length
S I/F Type
Shared
S Baud Rate
9600 Bit/s
S Parity Bit
S Protocol
S Auto-Status
S ADJUSTMENT - all parameters are for adjustment of the printer and the
paper (see also the following pages).
The last part of the printout is a list with all MACRO settings. In this case
MACRO 4 is marked with an asterisk (') which identifies it as the active macro.
If you do not save new settings, they are lost when you turn the printer OFF and
ON.
If you make modifications via the application in the active macro you will find the
new settings under the heading CURRENT SETTINGS.
Configuring the printer
8 Bit
Even
DTR
No
Configuring the printer
3.4

Explanation of Individual Menu Items

Main Functions

The following main functions are available:

S MACRO SELECT

To select one of the four macros which can be used for changing quickly the
printer settings for different applications. For example: Application A needs
12" paper and in Application B banking checks are printed.

S CHANGE MACRO

In this part it is possible to create a macro for specific application needs (for
detail information see chapter Function CHANGE MACRO beginning on the
next page).
Most parameters can be set via the control panel or via escape sequences
Note:
from the host computer.

S INSTALLATION

In the first sub-function named INTERFACE you can manipulate parameters
to enable communication with the host.
In the second sub-function labelled ADJUSTMENT you can optimize your
printouts.

S SAVE

Any desired changes to the default settings can be saved here. After power
ON and OFF the new settings are still activated.
While this function is executed the display flashes SAVING NOW.
3-5
3-6

Advertisement

Table of Contents
loading

Table of Contents