5.7
Camera Recorder Module
This section explains the errors which may occur in a camera recorder module and the troubleshooting.
Checking methods
Checking method
System monitor of GX Works3
Buffer memory
Recording monitor
Camera monitor
• If multiple errors occur at the same time, take corrective action for the errors in chronological order.
• If an error occurs in connection or communication with a network camera, the operation may be recovered
automatically from the error by retrying it from a camera recorder module. (Page 238 Alive check)
Error code types
For details, refer to the following:
Page 157 Error code types
Error types
For details, refer to the following:
Page 157 Error types
5 TROUBLESHOOTING
178
5.7 Camera Recorder Module
Details
Error codes can be checked in the system monitor of GX Works3.
Page 158 Checking the module status
Error codes can be checked in the following buffer memory:
Page 269 Current error area (Un\G140 to 149)
Page 270 Error log area (Un\G150 to 311)
The operating status of the recording function for each recording setting can
be checked in the recording monitor.
Page 143 RECORDING MONITOR
The connection status with a network camera can be checked in the camera
monitor.
Page 147 Camera Monitor Screen