Mitsubishi Electric MELSEC iQ-R Series User Manual page 142

Item
Saving Path (2) Detailed
Format Setting specification
Saving Path Example
*1 A format can be specified.
*2 Can be set only when selecting the checkbox of "Add Date and Time <DATETIME>."
*3 Case-sensitive
*4 Can be set only when selecting the checkbox of "Add."
*5 Up to 64 characters for a recording file name. If the number of characters in information added to a recording file name exceeds 54
characters, the first 54 ones are added.
3 RECORDING SETTING
140
3.5 Saving Path Setting
Add Date and Time <DATETIME>
*2
Date and Time Type
*2
Date and Time Format
Add Trigger Comment <TCOMMENT>
Add Value Data Add
Value Data
Device
Value
Representation
Number of Digits
for 0 Padding
Add String Data Add
String Data
Device
Data Type
Word Count
Format
Description
Select the checkbox to add a date and time to a file name.
A date and time according to the settings for "Date and Time Type" and
"Date and Time Format" is added to the position of <DATETIME>
specified for "Format."
Select the type of date and time information to be added ("File Saving
Trigger Date and Time" or "File Creation Date and Time").
Set the output format of the date and time column (2 to 24 characters).
The following reserved words
• YYYY: Year (4 digits)
• YY: Year (2 digits)
• MM: Month (2 digits)
• DD: Day (2 digits)
• ddd: Day of the week (3 digits)
• hh: Hour (2 digits)
• mm: Minute (2 digits)
• ss: Second (2 digits)
Select the checkbox to add a trigger comment to a file name.
A trigger comment is added to the position of <TCOMMENT> specified for
"Format."
Select the checkbox to add numerical value data to a file name.
Numerical value data according to the settings for "Add Value Data" is
added to the position of <DATA1> or <DATA2> specified for "Format."
<DATA1> or <DATA2> is displayed.
The address of the buffer memory that stores numerical value data is
displayed.
Select an output format of numerical value data to be added (decimal or
*4
hexadecimal).
Specify the number of digits for zero padding in numerical value data to be
*4
added.
The range of numerical values that can be set differs depending on the
data format as follows:
• Decimal: 2 to 10
• Hexadecimal: 2 to 8
Select the checkbox to add string data to a file name.
String data according to the settings for "Add String Data" is added to the
position of <DATA3> or <DATA4> specified for "Format."
<DATA3> or <DATA4> is displayed.
The address of the buffer memory that stores string data is displayed.
The data type of string data is displayed.
*4
Specify the number of characters in string data (1 to 16).
Set the format of a file name (up to 34 characters).
ASCII characters and the following reserved words can be entered.
• <DATETIME>
• <TCOMMENT>
• <DATA1>
• <DATA2>
• <DATA3>
• <DATA4>
A file name example is displayed based on the current setting.
• /XXXX_nTS01_001
XXXX: Additional information based on the current setting
_: Omitted when not adding additional information
n: Number of a recording setting (1 to 4)
TS01: Always displayed as a character indicating a saving cause
_001: Always displayed as a folder number
For details on save destinations and file names, refer to the following:
Page 49 Recording file
*3
can be specified.
*5