Mitsubishi Electric MELSEC iQ-R Series User Manual page 144

Precautions
• Even when changing system parameters, module parameters, or module extended parameters after setting each item in
the "Video Data Receiving Target Setting" screen, the selection status in the "Receiving Target" column does not
automatically change accordingly. After changing these parameters, review the setting.
• Up to four camera recorder modules are displayed in ascending order of the slot number even in the following states:
- "Empty" is selected in the module status setting in the system parameter.
- An item other than "Online" is selected for the mode setting in the module parameter.
• If there are multiple camera recorder modules set as the main ones on the four ascending slot numbers, only the module on
the smallest slot number is displayed. The other modules are not displayed.
3 RECORDING SETTING
142
3.6 Video Data Receiving Target Setting