Mitsubishi Electric MELSEC iQ-R Series User Manual page 106

Common setting
The following shows the screen for setting each item for GOT linkage.
This setting can be configured for each camera recorder module.
Item
GOT Linkage Enable/Disable
*1
IP Address
*1
Login Name
*1
Password
[FTP Communication Test]
*1
button
*1 Can be specified or clicked only when selecting "Enable" for "GOT Linkage Enable/Disable."
2 PARAMETER SETTING
104
2.3 Module Extended Parameters (Camera Recorder Module)
Description
Select "Enable" or "Disable" for GOT linkage.
By setting the GOT linkage, an ONVIF supported network camera can be linked with
a GOT.
Specify the IP address of an FTP server.
Specify the login name of an FTP server.
Specify the password for an FTP server.
Click this to perform the communication test on a GOT based on the entered settings.
Setting range
• Enable
• Disable
(Default: Disable)
• Empty (no IP address set)
• 1.0.0.1 to 223.255.255.254
(The IP address must start with
a value from 1 to 223, excluding
127.)
(Default: Empty)
• Empty (no login name set)
• Character string up to 16
characters
(Default: Empty)
• Empty (no password set)
• Character string up to 32
characters
(Default: Empty)
