Mitsubishi Electric MELSEC iQ-R Series User Manual page 272

Error log area (Un\G150 to 311)
This area is the same as a recorder module.
Page 219 Error log area (Un\G150 to 311)
If multiple errors with the same error code occur, only the log of the first error is stored in this area.
Logs of errors with the same error code occurred in each network camera can be checked in the following
buffer memories:
• 'Current error' (Un\G34301, Un\G34801, Un\G35301, Un\G35801)
• 'Error log 1 to 16' (Un\G34313 to 34470, Un\G34813 to 34970, Un\G35313 to 35470, Un\G35813 to 35970)
For details, refer to the following:
Page 282 Network camera status area (Un\G34000 to 37999)
Operation setting at event detection area (Un\G810 to 841)
The operation setting at event detection can be checked.
Buffer memory name
Error registration at
warning (type: system)
detection
Error (type: system)
detection
Operation setting at video data saving area (Un\G860)
The operation setting at video data saving can be checked.
Buffer memory name
Operation at video data saving
7 CAMERA RECORDER MODULE (DETAILED SPECIFICATIONS)
270
7.4 Buffer Memory
Address
Warning due to program
Un\G810
change during recording
operation
Error due to communication Un\G826
with a network camera
Address
Un\G860
Description
The status for "Warning due to program change during recording operation"
set in the module parameter is stored.
0: Error is not registered
1: Error is registered (continuous error)
The status for "Error due to communication with a network camera" set in the
module parameter is stored.
0: Error
1: Warning
Description
The operation status when saving video data set in the module parameter is
stored.
0: Video data saving takes priority
1: Video data receiving takes priority