Paper Type; Paper Size - Lexmark Optra Optra T Administrator's Manual

Attendance message Meaning and required action
Change <input source> The printer detects a different print material loaded in the paper source than what is set in the

PAPER TYPE

<Custom Type Name>
<size> Line 1 displays the paper source
<type><size>
• Tray x, where x is a paper tray from 1 to 5
• MP Feeder
• EnvFeeder
Note: Only installed paper sources display.
Line 2 displays one of the following items:
•
• <size>: If the requested type matches the type currently in the paper source and the custom type name has not
• <type><size>: The requested type (<type>) is a type other than a custom type. The type name is truncated to 9
When this message displays you can:
• Load the requested size and type print material in the paper source. The printer automatically clears the message
• Press
• Cancel the current job. Press
• Reset the printer. Press
• Reset the active bin. Press
Note: Resetting the printer deletes all current data from the print buffer, including all Print and Hold jobs. See
Printer" on page
Understanding Printer Messages
menus.
<Custom Type Name>: A user-defined name for custom type 1 through 6. The name is truncated to 16
characters. Use MarkVision to create custom type names.
been defined by you, only the print material or envelope size displays. The name is truncated to 16 characters.
characters. The requested size (<size>) of print material or envelope displays. The size name is truncated to 6
characters.
and continues printing the job.
Select to clear the message and continue printing.
displays. Press Select.
Menu>
displays. Press Select.
Menu>
Bin displays. Press Select.
43.
(<input source>), which is one of the following items:
Menu> or <Menu to enter the
or <Menu to enter the JOB
or <Menu to enter the JOB
115
JOB MENU. Press Menu> or
MENU. Press Menu> or <Menu
MENU. Press Menu> or <Menu

PAPER SIZE

or
<Menu until Cancel Job
until Reset Printer
until Reset Active
"Reset