Lexmark Optra Optra T Administrator's Manual page 48

Setup Menu (continued)
Menu item Values
Resource Save Off*
On
The Resource Save
receives a job that requires more memory than is available.
If Resource Save
language changes and printer resets. If the printer runs out of memory,
If Resource Save
those resources stored for the inactive printer language.
Download RAM*
Target Flash
Disk
The Download Target
Storing downloaded resources in flash memory or hard disk is permanent storage rather than the temporary storage that RAM
provides. You can add resources to flash memory or to the hard disk until the option is full. Use your software application or the
printer utilities to download resources to the printer.
The Download Target
defective or Read/Write or Write protected.
on, or during format and write operations. See
Disk does not display for
If neither option is installed,
printer memory (RAM).
*Factory default
Using the Operator Panel and Menus
setting determines what the printer does with downloaded resources, such as fonts and macros, if it
is set to On, the printer retains all permanent downloaded resources for all printer languages during
is set to Off, the printer retains permanent downloaded resources only until memory is needed. It deletes
menu item specifies the storage location for downloaded resources, such as fonts and macros.
menu item only displays if formatted flash memory or a hard disk is installed in the printer and is
51 Defective Flash
"51 Defective Flash" on page 107
Download Target if Job Buffer Size
Download Target does not display and all downloaded resources are automatically stored in
Memory Full
or 61 Defective Disk
or
is set to 100%.
48
displays on the operator panel.
may display when the printer is turned
"61 Defective Disk" on page 112.
not