Lexmark Optra Optra T Administrator's Manual page 53

Setup Menu (continued)
Menu item Values
Alarm Control Off
Single*
Continuous
Select Single
Select Off
Toner Alarm Off*
Single
Continuous
The Toner Alarm
If you select
If you select Off, the printer displays
Job Buffer Size Disabled*
10 ... 100
Job buffering lets you delay processing of a print job. The job is temporarily stored on an optional hard disk before being
printed. This usually frees the host computer during the actual printing of a print job.
The Job Buffer Size
job buffering set On.
The Job Buffer Size
61 Defective Disk
Job Buffer Size
buffer size is changed and saved, the hard disk is reformatted and current hard disk contents are deleted.
*Factory default
Using the Operator Panel and Menus
or Continuous if you want the alarm to sound any time the printer requires intervention.
if you do not want the alarm to sound.
setting lets you set the printer to stop printing when a toner low condition occurs.
Single or Continuous, the printer stops printing, displays
Toner Low
menu item lets you select the amount of hard disk space allocated to job buffering for all ports that have
menu item does not display if the installed option is defective or is Read/Write or Write protected.
displays during printer power on. See
can be set to Disabled
and continues printing.
"61 Defective Disk" on page
or from 10% to 100% in 1% increments. The first displayed size is 10%. When the job
53
88 Toner Low, and sounds the alarm.
112.