Removing An Output Option - Lexmark Optra Optra T Administrator's Manual

Removing an output option

Removing Options
Follow these instructions to remove an output expander, 5-bin mailbox,
or high-capacity output stacker.
1
If you are removing the topmost output option and do not plan to
return it to that position, remove the top cover.
You must attach the top cover to the printer or topmost output
option when you finish removing output options. In addition, it
may be necessary to remove the paper bail from the top cover,
depending on the type of output option to which it is attached.
Refer to the Setup Guide
2
If you are removing an output expander, detach the output
expander tray. If you are removing a 5-bin mailbox or high-
capacity output stacker, skip to step 3.
a
Hold the edge of the tray and lift it up so the lower tabs come
out of the slots on the output expander.
145
for more information.