Lexmark Optra Optra T Administrator's Manual page 120

Attendance message Meaning and required action
Install <device> The printer is requesting one of the following devices to be installed so it can print a job:
or Cancel Job
• Tray x, where x represents a tray from 2 to 5
• Output bin x, where x represents an output bin from 1 to 10
• Duplex unit
• Envelope feeder
Note: Only installed options display.
When this message displays you can:
• Insert the device to clear the message and continue printing.
• Cancel the current job. Press
• Reset the printer. Press
Note: Resetting the printer deletes all current data from the print buffer, including all Print and Hold jobs. See
Printer" on page
No Jobs Found. The Personal Identification Number (PIN) you entered is not a PIN associated with any print job.
Retry?
• Press
• Press
Refer to the
Print Jobs on This message displays when
Disk ? spooled to the hard disk. When the printer is turned back on, it asks for confirmation to print the waiting jobs.
• Press
• Press
Remove Paper The printer has detected the standard output bin is full.
Standard Bin
Remove the print material from the standard bin and press
Remove Paper The printer has detected output bin x, where x represents bin 1 through 10, is full.
Output Bin x
Remove the print material from the output bin and press
Understanding Printer Messages
displays. Press Select.
Menu>
displays. Press Select.
43.
Go to enter another PIN.
Stop to exit the PIN entry prompt.
User's Guide for more details.
Print Job Buffering
Go to print the jobs.
Return or Stop to delete all spooled jobs from the hard disk without printing them.
Menu> or <Menu to enter the
or <Menu to enter the JOB
is enabled and the printer is turned off while print jobs are being
Go
Go to continue printing.
120
JOB MENU. Press Menu> or
MENU. Press Menu> or <Menu
to continue printing.
<Menu until Cancel Job
until Reset Printer
"Reset