Lexmark Optra Optra T Administrator's Manual page 18

Paper Menu (continued)
Menu item Values
PAPER TYPE The PAPER TYPE
(continued) the printer in the following ways:
• Enables the printer to optimize print quality for the specified print material.
• Enables you to select paper sources through your software application by selecting only a type and size. A source
selection is unnecessary.
• Enables the printer to automatically link paper sources. Any sources that contain the same type and size of print
material are automatically linked by the printer if you have set the
settings for the paper sources.
Select
Select
Note: Before loading print material in any paper source, make sure you set the
the paper source. Also, select the paper size and the type from your software application for the print material you are
loading.
Custom Type 1 through 6 refers to special types of print materials. If a user-defined name is available, it displays instead
of Custom Type x. Use MarkVision to create custom type names. The name is truncated to 14 characters. See
TYPES" on page
If you are using different print material in the paper sources, each source with a different print material must have the
PAPER SIZE
source becomes empty, the printer selects print material from another source since the printer sees the trays as linked.
This might cause a one-page letter to print on a sheet of labels or on a transparency.
*Factory default
Using the Operator Panel and Menus
setting lets you specify the type of print material installed in each paper source. This setting is used by
Manual Pap Type when manually feeding a single sheet of print material through the multipurpose feeder.
Manual Env Type when manually feeding an envelope through the multipurpose feeder.
19.
and PAPER TYPE set to a unique value to disable the automatic tray linking feature. Otherwise, if a paper
PAPER SIZE
18
and the PAPER TYPE to the correct
PAPER SIZE and the PAPER TYPE for
"CUSTOM