Confidential Job - Lexmark Optra Optra T Administrator's Manual

Attendance message Meaning and required action
Check <device> The printer has lost communication with one of the following devices:
Connection
• Tray x, where x represents a tray from 2 to 5
Reattach • Output bin x, where x represents an output bin from 1 to 10
<device> • Duplex unit
• Envelope feeder
Note: Only installed options display.
Communication may be lost if the optional device was removed from the printer, for example, to clear a paper jam. It
may still be attached to the printer, but may not be fully connected or may be experiencing a hardware failure.
If this message displays:
• Reestablish communication by removing the optional device and reattaching it to the printer. When the optional
• Press
• In case of a hardware failure, turn the printer off and back on. If the error recurs, turn the printer off, remove the
Close Door or The upper front door is open or the print cartridge is not installed.
Insert Cartridge
Close the door or install the print cartridge, then close the door.
Close Duplex The duplex rear door is open.
Rear Door
Close the duplex rear door.
Delete All Jobs. The printer requests confirmation to delete all Print and Hold jobs. This message displays if
Go/Stop? selected from the
• Press
• Press
See
Understanding Printer Messages
device is recognized by the printer, the message clears.
Go to run a configuration change and continue printing. The printer resumes printing without the optional
device.
optional device, and call for service.

CONFIDENTIAL JOB

Go to continue. The printer deletes all Confidential jobs, or all Repeat Print, Reserve Print, and Verify Print
jobs.
Stop to cancel this operation.
"CONFIDENTIAL JOB" on page 37
or the HELD JOBS menu item.
or "HELD JOBS" on page 40
116
Delete All Jobs
for more details.
is