Lexmark Optra Optra T Administrator's Manual page 111

Attendance message Meaning and required action
56 Std Parallel Data is sent to the printer through the parallel port, but the parallel port is disabled. When the error displays, the
Port Disabled reporting of other errors is suppressed until the menus are entered or the printer is reset.
56 Parallel Port If one of these messages display:
x Disabled
• Make sure
• Press
• Reset the printer. Press
Note: Resetting the printer deletes all current data from the print buffer, including all Print and Hold jobs. See
Printer" on page
58 Too Many The printer detects that too many optional drawers with matching trays are installed.
Trays Attached
58 Too Many The printer detects that too many output options are installed or an unsupported configuration of output bins is
Bins Attached installed. For example, you must install the high-capacity output stacker as the first output option on the printer.
58 Too Many The printer detects that too many hard disks are installed. You can install only one hard disk in your printer.
Disks Installed
58 Too Many The printer detects that too many flash memory options are installed.
Flash Options
Turn the printer off and remove the extra option.
59 Incompatible The printer detects that an incompatible option is installed. Options compatible with your printer are labeled with a
<Device> colored triangle.
<device>
Understanding Printer Messages
Parallel Buffer in the
Go to clear the message. The printer discards any data received through the parallel port.
Menu>
displays. Press Select.
43.
is one of the following paper handling options:
– envelope feeder
– duplex unit
– tray x, where x represents a tray from 2 to 5
– output bin x, where x represents a bin from 1 to 10
PARALLEL MENU is not set to Disabled.
or <Menu to enter the JOB MENU. Press
111
Menu> or <Menu until Reset Printer
"Reset