Lexmark Optra Optra T Administrator's Manual page 51

Setup Menu (continued)
Menu item Values
Auto Continue
61 Defective Disk
(continued)
62 Disk Full
63 Unformatted Disk
80 Scheduled Maintenance
88 Toner Low
Print Jobs on Disk?
If one of these errors occurs and
Auto Continue
processing.
This setting is also used as a timer. After an inactive period in the menus, the printer automatically exits the menus and returns
to Ready.
Jam Recovery On
Off
Auto*
When Jam Recovery
When Jam Recovery
successfully exited the printer. The printer reprints all jammed pages.
If Jam Recovery
page is needed for other printer tasks.
*Factory default
Using the Operator Panel and Menus
Auto Continue
is set to a numerical value, the printer waits for the specified length of time and then automatically resumes
is set to Off, the printer does not reprint a page that has jammed.
is set to On, the printer keeps the image for a printed page until the printer signals that the page has
is set to Auto, the printer keeps the image and reprints the page unless the memory required to hold the
is set to Disabled, the printer stops and waits for operator intervention. When
51