Lexmark Optra Optra T Administrator's Manual page 106

Attendance message Meaning and required action
37 Insufficient The printer memory contains Print and Hold jobs and is too full to continue processing the current job.
Memory
Note: The messages,
panel until you do one of the following:
Held Jobs may be • Press
lost.
• All Repeat, Verify, and Reserve Print jobs are deleted before any Confidential Print Jobs are deleted.
• Reset the printer. Press
Note: Resetting the printer deletes all current data from the print buffer, including all Print and Hold jobs. See
Printer" on page
38 Memory Full The printer is processing data, but the memory used to store pages is full.
• Press
• Cancel the current job. Press
• Reset the printer. Press
Note: Resetting the printer deletes all current data from the print buffer, including all Print and Hold jobs. See
Printer" on page
After resetting the printer, reduce the complexity of the print job and send it to print again. To simplify the print job:
• Reduce the amount of text or graphics on a page.
• Reduce the print resolution.
• Delete unnecessary downloaded fonts or macros.
• Install additional printer memory.
Understanding Printer Messages
37 Insufficient Memory
Go to clear the message and continue printing. The printer frees memory by deleting the oldest held print
job and continues deleting held jobs until there is enough printer memory to process the current print job.
Menu>
displays. Press Select.
43.
Go to clear the message and continue printing. However, some data may not print or may not print correctly.
displays. Press Select.
Menu>
displays. Press Select.
43.
and Held Jobs may be
or <Menu to enter the JOB
Menu> or <Menu to enter the
or <Menu to enter the JOB
106
lost., display alternately on the operator
MENU. Press Menu> or <Menu
JOB MENU. Press Menu> or
MENU. Press Menu> or <Menu
until Reset Printer
"Reset
<Menu until Cancel Job
until Reset Printer
"Reset