Pcl Emul Menu - Lexmark Optra Optra T Administrator's Manual

PCL Emul Menu

PCL Emul Menu
Menu item Values
Font Source Resident*
Download
Flash
Disk
All
Font Source
The
not contain any fonts, it is not listed as a value. Fonts are loaded and stored on the flash memory option.
Font Name Font position and font name for all fonts in the selected font source (displays on both lines of the operator panel)
(R0 Courier 10*)
Always select the font source before you select a font name. After you select a font source, choose the specific font from
Font Name
the
source abbreviation is R for resident, F for flash, K for disk, and D for download.
Point Size 1...1008 (in increments of 0.25)
(only displays for
(12*)
PostScript or
If you chose a scalable typographic font, you can select the point size for the font. Point size refers to the height of the
typographic fonts)
characters in the font. One point equals approximately 1/72 of an inch. You can select point sizes from 1 to 1008 in
increments of 0.25 points.
* Factory default
Using the Operator Panel and Menus
Use the PCL EMUL MENU to change printer settings that only affect
jobs printed using the PCL emulation printer language.
setting determines which fonts display in the
menu item. The printer displays the font source abbreviation, font ID, and font name for each font. The font
Font Name
menu. If a font source is not installed or does
55