Lexmark Optra Optra T Administrator's Manual page 80

LocalTalk Menu (continued)
Menu item Values
Job Buffering Off*
On
Job Buffering lets you delay processing of a print job. The job is temporarily stored on a hard disk before being printed,
usually freeing the host computer while the job prints.
The Job Buffering
protected, and if
during disk format and write operations. See
If Job Buffering
buffered.
Changing the
NPA Hosts 1...10 (2*)
Use this setting to specify the maximum number of NPA hosts that can register for NPA printer alerts. When the number of
hosts registered for NPA alerts exceeds the quantity specified by
alerts are ignored.
Note: Changing the
LocalTalk Name Lexmark (Printer Name)
This setting identifies the printer model name stored in printer memory. It cannot be modified through the operator panel.
LocalTalk Addr (LocalTalk Node Number)
This setting identifies the LocalTalk Node number assigned to the printer. It cannot be modified through the operator panel.
LocalTalk Zone (Zone name provided by LocalTalk network)
This setting determines the LocalTalk Zone. This setting cannot be modified through the operator panel.
* Factory default
Using the Operator Panel and Menus
menu item only displays if the installed hard disk is formatted and is not defective, Read/Write or Write
Job Buffer Size is not set to Disabled.
is set to On, print jobs are buffered to the hard disk. If
Job Buffering setting automatically resets the printer.
NPA Hosts setting automatically resets the printer.
61 Defective Disk
"61 Defective Disk" on page 112.
Job Buffering
NPA Hosts, any additional hosts attempting to register for
80
may display when the printer is turned on, or
is set to Off, print jobs are not