Lexmark Optra Optra T Administrator's Manual page 34

Utilities Menu (continued)
Menu item Values
Print Fonts PCL Fonts
PS Fonts
Press Select
Fonts or
Print Directory Press Select
The Print Directory
Technical Reference for details.
Factory Defaults Restore All
If you select
• All downloaded resources (fonts, macros, symbol sets) in the printer memory are deleted.
• All menu settings return to the factory default setting except:
– The
– All settings in the
USB
Format Flash Yes
No
Formatting the flash memory deletes all resources (fonts, macros, symbol sets) stored in flash memory and prepares the
flash memory card to receive new resources.
The Format Flash
51 Defective Flash
Flash" on page
Warning: If you select
*Factory default
Using the Operator Panel and Menus
to print a font sample list that shows all the fonts currently available in the selected printer language,
PS Fonts.
to print a list of all the resources stored in flash memory or on a hard disk.
menu item is available only if at least one of the options is installed and formatted. Refer to the
Restore All:
Display Language setting in the
PARALLEL MENU,
MENU, and FAX MENU.
menu item only displays if the installed flash memory is not defective or Read/Write or Write protected.
may display when the printer is turned on, or during flash format and write operations. See
107.
Format Flash and press Go, any data stored in flash memory is lost. Do not turn off the printer while
the flash is formatting.
SETUP MENU.
SERIAL MENU, NETWORK
34
MENU, INFRARED MENU, LOCALTALK
PCL
MENU,
"51 Defective