Lexmark Optra Optra T Administrator's Manual page 109

Attendance message Meaning and required action
54 Standard A serial interface error is detected (framing or parity) on the standard serial port. This error usually indicates the serial
Serial Error link has not been set up correctly. When the serial error displays, the reporting of other serial errors is suppressed
until interface parameters are changed or the printer is reset.
54 Serial A serial interface error is detected (framing or parity) on serial port x, where x is optional serial port 1 or 2. This error
Option x Error usually indicates the serial link has not been set up correctly. When the serial error displays, the reporting of other
serial errors is suppressed until interface parameters are changed or the printer is reset.
54 Std Par ENA Displays only during the printer power on cycle to indicate the connection to an external print server (also called an
Connection Lost external network adapter or ENA) is lost.
54 Par x ENA
Connection Lost
54 Std Ser Fax The standard serial port or serial port x, where x is an optional serial port, is configured to receive fax data, but the
Connection Lost connection to the external modem has been lost. If
automatically assumes a modem is connected for fax processing. See
54 Ser x Fax
Connection Lost
The printer has detected that a network port is installed but cannot establish communications with it.
54 Std Network
Software Error • It may be necessary to program new firmware in the network interface via the parallel port after this message has
54 Network x
Software Error Check the interface to:
• Verify you are using the correct cable.
• Make sure the parallel or serial interface parameters (protocol, baud, parity, data bits) are correct.
If one of these messages display:
• Press
• Reset the printer. Press
Note: Resetting the printer deletes all current data from the print buffer, including all Print and Hold jobs. See
Printer" on page
Understanding Printer Messages
been cleared.
Go to clear the message and continue printing. However, some data may not print or may not print correctly.
Menu>
displays. Press Select.
43.
Fax Port in the
or <Menu to enter the JOB MENU. Press
109
FAX MENU is not set to Disabled, the printer
"Fax Menu" on page 84.
Menu> or <Menu until Reset Printer
"Reset