Appendix C
WIRING
Network
On the rear panel of the TSU 600 is an 8-position modular jack labeled
NETWORK. This connector is used for connecting to the network. See
Table C-1, Network Pinouts for the pinout for the network connector.
Network Connections
The network connections are as follows:
Connector Type
Part Number
Pin
1
R1 RXDATA-RING
2
T1 RXDATA-TIP
3
UNUSED
4
R1 TXDATA-RING
5
T TXDATA-TIP
6,7,8
UNUSED
61202076L1-1
Network Pinouts
(USOC) RJ-48C
AMP# 555164-2
Network Pinouts
Table C-1.
Name
Receive data from the network
Receive data from the network
Send data toward the network
Send data toward the network
TSU 600 User Manual
Description
C-1