Chery A1 2009 Service Manual page 452

3.
CHECK CLUTCH SPEED SENSOR RESISTANCE
• Check the resistance between clutch speed sensor
terminal 1 and 2 in the sensor electrical connector.
• 450 ± 50 (20 °C) should exist.
Is the check result normal?
Yes >>
Go to the next step.
No >>
Replace the sensor.
4.
CHECK CLUTCH SPEED SENSOR SIGNAL CIRCUIT
• Turn ignition switch off.
• Disconnect the AMT control module electrical connector.
• Check the continuity between the clutch speed sensor terminal 1 and the AMT control module electrical connec-
tor terminal 38.
CLUTCH
SPEED AMT CONTROL
SENSOR MODULE
TERMINAL
1
• Check the continuity between the clutch speed sensor terminal 2 and the AMT control module electrical connec-
tor terminal 50.
CLUTCH
SPEED AMT CONTROL
SENSOR MODULE
TERMINAL
2
76
08–
DIAGNOSIS & TESTING
CONTINUITY
38 Yes
CONTINUITY
50 Yes
PZSMD080006
Chery Automobile Co., Ltd.